Bootloaders
41 files
-
Universal EFI for all recent macOS versions including Sequoia and Tahoe
By KGP-iMacPro
Attached for download my universal opencore EFI-Folder for all recent versions of macOS (also works with Sequoia and Tahoe). This EFI is especially designed for the X299 community and all my former followers, however, with a few changes, it might be also?applicable for other more recent builds and SMBIOS Versions?different from SMBIOS macPro7,1. In case of questions or issues just leave your comment below.
?
Please?add/delete or enable/disable all system specific kexts for your build in EFI/OCI/Kexts and config.plist -> Kernel -> Add .
?
Disable Whatevergreen.kext for booting the Tahoe installers. There is an additional option of?NootRX.kext implemented, to boot the Tahoe installers if deemed necessary. ? In any case, with SMBIOS macPro7,1, none of these kexts are required, if your GPU is supported by Apple.??
?
As an already implemented option, you can choose between IntelLucy.kext or SmallTreeIntel8259x.kext by enabling/disabling the latter in config.plist -> Kernel -> Add. Small-Tree: SmallTreeIntel8259x.kext works flawless up to Sequoia. For Tahoe only use SmallTreeIntel8259x-KGP-Tahoe.kext of this EFI-Folder distribution although you might still witness KPs. IntelLucy: Successfully tested with direct NIC -> router LAN connection as well as with my MikroTik CRS309 switch with H!Fiber Marvel 113C SFP+ RJ45 (30m) and MikroTik S+RJ10 transceivers. No way to get IntelLucy work with my former Netgear ProSafe XS508M switch! ?Also no way to get Apple's native DEXT Drivers work due to the missing IOMMU implementation of the X550-AT2 NICs of the ASUS X299 Sage 10G.
?
Else, just complete your SMBIOS credentials with Opencore Configurator (OCC) and use your own USB-Mapping-Kext before booting with this EFI. If you don't have any, follow my?XHC USB Kext Creation Guideline?(sorry, this guideline is not in any other forum).
?
For the adaptation of SSDTs and ACPI-patches in EFI/OC/ACPI, config.plist->ACPI -> Add?and config.plist->ACPI -> Patch (by default everything disabled), see my else partly outdated?installation guide?for Mojave. Important note: If you do not adopt and enable?SSDT-X299-HDEF.aml, add bootarg "alcid=2" or the layout-id you need for your onboard sound chip. The boot args are in NVRAM -> UUID ->?7C436110-AB2A-4BBB-A880-FE41995C9F82 -> boot-args. Otherwise AppleALC.kext won't inject. ?
?
Good luck!??
?
Build: ASUS X299 Sage 10G, i9-7980XE, 128GB Corsair Dominator Platinum DDR4, Radeon VII, GC-Titan Ridge, Broadcom BCM94360CD, LG 5K 34WK95U-W, Samsung ProXPress C2680FX, Edifier S360DB 2.1 Soundsystem (optical in), HyperX QuadCast 2 - USB Microphone, Logitech MX Brio Webcam,?MikroTik CRS309 switch with H!Fiber Marvel 113C SFP+ RJ45 Transceivers (30m),?running macOS: Sequoia and Tahoe with opencore 1.0.6. For further details see my build description.?
?
?
?
?
?
?
735 downloads
0 comments
Updated
-
EFI - macOS Tahoe Beta 8 - Sequoia 15.7 - All-in-one - Install Pen Drive and to Run (Tahoe-Sequoia) 25-08-2025
EFI - macOS Tahoe Beta 8 - Sequoia 15.7 - All-in-one - Install Pen Drive and to Run (Tahoe-Sequoia) 25-08-2025
?
Here the list of Kexts this EFI has:
?
AMFIPass.kext
IO80211FamilyLegacy.kext
AppleALC.kext
IOSkywalkFamily.kext
AppleIGC.kext
Lilu.kext
BlueToolFixup.kext
NVMeFix.kext
BrcmFirmwareData.kext
RealtekRTL8111.kext
BrcmPatchRAM3.kext
RestrictEvents.kext
CPUFriend.kext
SMCProcessor.kext
CryptexFixup.kext
SMCSuperIO.kext
DebugEnhancer.kext
USBMap.kext
ECEnabler.kext
VirtualSMC.kext
FeatureUnlock.kext
WhateverGreen.kext
HibernationFixup.kext
XHCI-unsupported.kext
?
?
The platform I created this EFI is for Rocket Lake (11 gen Intel)
My Hardware is an B560M-H Motherboard from Gigabyte.
?
But I guess it will work on other hackintoshes at least the Pen Drive to run Install macOS Beta (26.0 - Tahoe) Beta 8.
The same EFI will work even to run installed macOS Tahoe / Sequoia 15.7, it?s fully compatible.
?
I saw that people are using one EFI for Pen Drive and another one to run the installed system (macOS Tahoe),
now I had made this EFI that runs for Pen Drive (Vanilla macOS Tahoe)
sudo ./createmediainstall --volume /Volumes/your_pen_drive
then put the EFI I made in EFI boot partition of your created pen drive with the command.
?
After that when you installed the Tahoe, it will boot with the same EFI too.
968 downloads
Updated
-
EFI for Gigabyte Z490 VISION G / i5-10600 / Sapphire Nitro+ Radeon RX 590
By verdazil
EFI for Gigabyte Z490 VISION G / i5-10600 / Sapphire Nitro+ Radeon RX 590
Not suitable for installation. Only for running the installed system.
129 downloads
0 comments
Submitted
-
EFI folder for install and run macOS Tahoe beta on Acer-315-56 notebook
By verdazil
EFI folder for install and run macOS Tahoe beta on Acer-315-56 notebook
110 downloads
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Updated
-
.thumb.png.bf3f151b774fc4215da54586ac412490.png)
0 comments
Submitted
-
0 comments
Submitted
-
OpenCore Theme - GlowTime - 1920px Screen Size
By litemintx
Hi Everyone, My first ever opencore(1.0.1) theme, tested on T480.
This is for those with 1920px screen size.
Monterey to Sequioa Icons
1 - ZorinOS icon
and other system icons
litemint09 theme.mp4141 downloads
Updated
-
Updated efi's for install and boot Sonoma 14.5 Alienware M17XR3
By ovidoi
Hi, this is EFI files for install and boot Sonoma 14.5.
Follow :?/forum/files/file/1062-efis-clover-and-opencore-for-catalina-and-sonoma-1421/
Smbios MBP 16.4 work good.
L.E. Still need help for Brightness hardware slider (only software) and USB 3.0 chip NEC.
?
?
48 downloads
0 comments
Submitted
-
Efi's Clover and Opencore for Catalina and Sonoma 14.2.1
By ovidoi
Hi, I upload two efi's for Laptop Dell Alienware m17x R3.
1. is for install with OC for Sonoma with no issue, after install OS download OCLP 1.4.3 and install for DGPU AMD radeon HD 6850M acceleration. SMBIOS install is MBP 16.3.
2. is for booting post install Catalina and Sonoma. Catalina works all function with FN key including sleep and wake lid and power button ( if no, remove ssdt-usbx from acpi/patched folder).
For Catalina graphics install OCLP 0.4.3?
For Sonoma now not works all key's, ex. brightness slide not display in display setting.
Boot both OS'es SMBIOS is MBP 11.5 for detect correct sensors, MBP 8.3 not accurate detecting and use Macs fan control for good work fan's.
L.E. I use ssd-usbx for full speed cpu (I don't know how it works) because I have battery issue and cpu work only 1,8 GHz, with this ssdt work in full speed 3,1 GHz but not work brightness.
In Sonoma cpu work with 2,2 GHz with this ssdt but no turbo.
In clover ACPI is more ssdt's files for any variant of settings and cosmetics
Still working for Sonoma, working good and speed is ok for this Laptop in special Catalina.
If anybody have more knowledge I am open for collaboration.
Good luck and enjoy.
P.S. I have issue with ssd trim enabler in Sonoma, refuse to activate in all mods, in Catalina working. Eny idea?
? ? ? ?I try to install Sonoma 14.4 but have issue with "still waiting for root device" only 14.2.1 work, not try with 14.3.
?273 downloads
0 comments
Updated
-
0 comments
Updated
-
Submitted
-
Lenovo ideapad 100 15ibd Intel Iris 5100
By Ludox
OC_EFI installation and startup, OpenCore-Patcher is required.
223 downloads
0 comments
Updated
-
0 comments
Submitted
-
EFI with OpenCore 0.8.7 for Z390 Aorus Elite + RX 6600
By miliuco
There are 4 config.plist files for different SMBIOS:
config-13-imac-amd.plist: iMac19,1 + dGPU AMD + iGPU enabled in BIOS config-13-imac-intel.plist: iMac19,1 + iGPU enabled in BIOS as main card config-13-imacpro.plist: iMacPro1,1 + dGPU AMD + iGPU disabled in BIOS config-13-macpro.plist: MacPro7,1 + dGPU AMD + iGPU disabled in BIOS. Remember to fill in your serial and ROM numbers (they are empty).
186 downloads
Submitted
-
Bootdisk Utility
By cvad
Make bootable USB Flash Disk for MAC OS X with Latest Clover bootloader revision fast and easy by one click! under OS Windows.
Special utility from cvad & russian MAC community for new hackintosh users.
?
Enjoy...
?
For more information and complete instructions please see this topic.
?
Anyone who likes the program, please support its?Community Score.
?
?
Feel free to "Rate File"
43,295 downloads
Updated
-
EFI's of Real Mac (MacBookPro12,1) - MacBook Pro 13'' Retina Early 2015 with Latest OpenCore 0.8.7 and Latest Kext's
EFI's of Real Mac (MacBookPro12,1) - MacBook Pro 13'' Retina Early 2015 with Latest OpenCore 0.8.7 and Latest Kext's today's version 11-19-22.
?
Use this OpenCore to boot into Ventura 13.0.1 or Monterey 12.6.2 with latest OpenCore 0.8.7 provided by OCLP 0.5.2.
This EFI is ready for booting in Windows 11 22H2 (BootCamp). Has the latest kext's today's 11/19/22 version. From?https://dortania.github.io/build-repo/
?
Works everything OOB.
Intel Iris Graphics 6100 1536MB.
Now BrightnessKeys is working.
Battery Info is working too.
?
Everything is Working.?
?
To work acceleration in Intel Iris Graphics 6100 with Ventura 13.0.1 or Beta 13.1, you need to install OCLP 0.5.2 Official Release with Root Patches. =>?https://github.com/dortania/OpenCore-Legacy-Patcher/releases/download/0.5.2/OpenCore-Patcher-GUI.app.zip
?
?
402 downloads
Updated
-
EFI - Gigabyte B560M-H - OpenCore 0.8.7 - All Working - Ventura 13.0.1 or Monterey 12.6.1
EFI - Gigabyte B560M-H - OpenCore 0.8.7 - All Working - Ventura 13.0.1 or Monterey 12.6.1
?
All kexts are from?today's?files from?https://dortania.github.io/build-repo/?(11/19/22) - Latest!
?
Everything is working (11th Gen Intel(R) Core(TM) i5-11400 @ 2.60GHz)
?
AMD Radeon RX 570 4GB
524 downloads
Updated
-
EFI - Acer Aspire ES1-572 - OpenCore 0.8.6 - Ventura 13.0.1
Latest EFI with OpenCore 0.8.6 for Acer Aspire ES1-572.
?
Everything is working even Card Reader.
?
Full support for Ventura 13.0.1.
142 downloads
- acer aspire
- acer
- (and 4 more)
0 comments
Submitted
-
EFI folder for Dell Latitude 5510 opencore 0.8.5 Monterey 12.6.1
By Aigors
Efi folder Opencore 0.8.5 for Dell Latitude 5510 for Monterey 12.6.1
What works?
Graphics even external port?
Audio?
Sleep??
Touchpad and trackpad with Gestures?
microsd card reader
WiFi?
Bluetooth?
?
?
422 downloads
Submitted
-
OpenCore 0.8.4 (build 2022-08-24) EFI for Monterey and Ventura
By miliuco
Although it is a beta version, it works very well without errors (at least in my case).?Included recent versions of the kexts.
It works fine on my hardware (Z390 Aorus Elite + i9 9700 + RX6600) although with the proper customization of kexts it can work well with Z390 boards and 9th gen CPUs.
?
There are several configuration files, the ones starting with config-12 are for Monterey and the ones starting with config-13 are for Ventura. Variants are included for 4 possible SMBIOS options:
iMac19,1 with AMD dGPU + iGPU headless mode iMac19,1 with iGPU as main card without dGPU iMacPro1,1 with dGPU + iGPU disabled MacPro7,1 with dGPU + iGPU disabled.
List of config.plist files:
config-12-imac-amd.plist: macOS 12 + iMac19,1 + dGPU AMD + iGPU enabled in BIOS config-12-imac-intel.plist: macOS 12 + ?iMac19,1 + iGPU enabled in BIOS as main card config-12-imacpro.plist: macOS 12 + iMacPro1,1 + dGPU AMD + iGPU disabled in BIOS config-12-macpro.plist: macOS 12 + ?MacPro7,1 + dGPU AMD + iGPU disabled in BIOS config-13-imac-amd.plist: macOS 13 + ?iMac19,1 + dGPU AMD + iGPU enabled in BIOS config-13-imac-intel.plist: macOS 13 + ?iMac19,1 + iGPU enabled in BIOS as main card config-13-imacpro.plist: macOS 13 + iMacPro1,1 + dGPU AMD + iGPU disabled in BIOS? config-13-macpro.plist: macOS 13 + MacPro7,1 + dGPU AMD + iGPU disabled in BIOS ?
Notes:
rename selected config file to config.plist for RX 580 and other Polaris cards remove agdpmod=pikera from boot-args add serial numbers for the SMBIOS model thanks to OC-Anonymiser by @dreamwhite?(Python script for removing sensitive data from OpenCore's config.plist). ?
614 downloads
0 comments
Updated
-
Clover 5149 EFI for Monterey and Ventura. Recent versions of the kexts are included.
By miliuco
It works fine on my hardware (Z390 Aorus Elite + i9 9700 + RX6600) although with the proper customization in terms of kexts it can work well with other Z390 boards and 9th gen CPUs, with integrated and/or AMD GPU.
?
There are 2 configuration files:
config-imac-amd.plist: iMac 19.1 + AMD dGPU + iGPU headless mode config-imac-intel.plist: iMac19,1 + iGPU as main - without dGPU. Notes:
rename selected config file to config.plist for RX 580 and other Polaris cards remove agdpmod=pikera from boot-args add serial numbers for the SMBIOS model. thanks to @Slice?and others (jief666,?vectorsigma72, @LAbyOne?@Sherlocks?etc.) for this work.745 downloads
0 comments
Submitted
-
Unsupported Mac A1502 - EFI (MacBook Pro Early 2015 Retina) - OpenCore 0.8.4 - Ventura 13 beta 6 - Intel Iris Graphics 6100 spoofed as Intel HD 4000 in OCLP 0.5.0
Unsupported Mac A1502 - EFI (MacBook Pro Early 2015 Retina) - OpenCore 0.8.4 - Ventura 13 beta 6 - Intel Iris Graphics 6100 spoofed as Intel HD 4000 in OCLP 0.5.0 .
?
Need Root Patches with OpenCore Legacy Patcher 0.5.0 - OpenCore-Patcher.app.
258 downloads
0 comments
Updated
-
OpenCore 0.8.4 for Gigabyte Motherboard - B560M-H - macOS Ventura 13.0 Beta 5
OpenCore 0.8.4 for Gigabyte Motherboard - B560M-H - macOS Ventura 13.0 Beta 5.
?
Everything is working OOB.
?
To run USB 3.2 Type A, you need USBToolBox.kext and his utility for Windows (10 & 11) to generate an UTBMap.kext after this your USB will work in 3.0, 3.1 & 3.2 speeds.
147 downloads
- opencore 0.8.4
- ventura
- (and 3 more)
Updated
-
Top Downloads
-
