All Activity
- Past hour
-
uu88vvcom1 joined the community -
Ayaz Ayhan joined the community - Today
-
Simon B changed their profile photo -
mm88uscoom joined the community
-
King Custom Coatings joined the community -
win456itcom joined the community -
KRCLUB 2 joined the community -
Jevd Gsjxv changed their profile photo -
Ev99cx joined the community -
00:00.0 8086:3e30 /PCI0@0/pci8086,3e30@0 = PciRoot(0x0)/Pci(0x0,0x0) 00:01.0 8086:1901 /PCI0@0/PEG0@1 = PciRoot(0x0)/Pci(0x1,0x0) 00:14.0 8086:a36d /PCI0@0/XHC@14 = PciRoot(0x0)/Pci(0x14,0x0) 00:14.2 8086:a36f /PCI0@0/pci8086,a36f@14,2 = PciRoot(0x0)/Pci(0x14,0x2) 00:16.0 8086:a360 /PCI0@0/HECI@16 = PciRoot(0x0)/Pci(0x16,0x0) 00:17.0 8086:a352 /PCI0@0/SAT0@17 = PciRoot(0x0)/Pci(0x17,0x0) 00:1b.0 8086:a340 /PCI0@0/RP17@1B = PciRoot(0x0)/Pci(0x1B,0x0) 00:1b.4 8086:a32c /PCI0@0/RP21@1B,4 = PciRoot(0x0)/Pci(0x1B,0x4) 00:1c.0 8086:a338 /PCI0@0/RP01@1C = PciRoot(0x0)/Pci(0x1C,0x0) 00:1d.0 8086:a330 /PCI0@0/RP09@1D = PciRoot(0x0)/Pci(0x1D,0x0) 00:1f.0 8086:a305 /PCI0@0/LPCB@1F = PciRoot(0x0)/Pci(0x1F,0x0) 00:1f.3 8086:a348 /PCI0@0/HDEF@1F,3 = PciRoot(0x0)/Pci(0x1F,0x3) 00:1f.4 8086:a323 /PCI0@0/SBUS@1F,4 = PciRoot(0x0)/Pci(0x1F,0x4) 00:1f.5 8086:a324 /PCI0@0/pci8086,a324@1F,5 = PciRoot(0x0)/Pci(0x1F,0x5) 00:1f.6 8086:15bc /PCI0@0/GLAN@1F,6 = PciRoot(0x0)/Pci(0x1F,0x6) 01:00.0 1002:1478 /PCI0@0/PEG0@1/PEGP@0 = PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0) 05:00.0 144d:a804 /PCI0@0/RP21@1B,4/PXSX@0 = PciRoot(0x0)/Pci(0x1B,0x4)/Pci(0x0,0x0) 07:00.0 1987:5018 /PCI0@0/RP09@1D/PXSX@0 = PciRoot(0x0)/Pci(0x1D,0x0)/Pci(0x0,0x0) 02:00.0 1002:1479 /PCI0@0/PEG0@1/PEGP@0/pci-bridge@0 = PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)/Pci(0x0,0x0) 03:00.0 1002:73df /PCI0@0/PEG0@1/PEGP@0/pci-bridge@0/GFX0@0 = PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x0,0x0) 03:00.1 1002:ab28 /PCI0@0/PEG0@1/PEGP@0/pci-bridge@0/HDAU@0,1 = PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x0,0x1) so i updated the acpi with as per above suggestion /PCI0@0/PEG0@1/PEGP@0/pci-bridge@0/GFX0@0 SSDT-BRG0-GFX0.aml SSDT-sPPT.aml
-
Don't rant, I know this is off topic. I have a problem with the "Download Full Installer" app. A download of 15.7.1 stopped at 16 GB, and now my macOS partition only shows 26 GB because the downloaded 16 GB is still taking up space. Question: Where does the "Download Full Installer" save the downloads? I go to Users/Library/Application Support and I don't see anything about the "Download Full Installer." Thanks for the quick tip. I want to install 15.7.1 Sequoia on another Mac today. Thanks for the unfriendly non-help... but I found it myself ?
- Yesterday
-
Sorry @MaLd0n Still the same issue with the above EFI. Exactly the same problem. I am beginning to think this generation of chipset has trouble with > 16GB (which is not logical). Same happens when trying with Sonoma. I will try upgrading from Ventura using the Apple package but it is really a concern if I don't have a back up boot USB.
-
You dont need to rename anything Put Xcode 16 in a folder like this Open Applications Xcode 26 ? Settings ? Locations ? Command Line Tools ? Choose the Xcode 16.4 (16F6) You can change to Xcode 26 anytime
-
Yes my friend, is another way to do it !! Nice shot!! You can have many Xcode installed, just renamed correctly
-
I also ordered the same wifi chip but i still hesitate because of AirDrop, but i will try as soon as chip arrives -
Tim OBrien joined the community -
Tyler Doelle joined the community -
Shine Khan joined the community -
I came up with another way. I just renamed it to Xcode16.4 and before compilation I rename the required one in Xcode.
- 30,479 replies
-
- 1
-
-
- bootloader
- efi
- (and 2 more)
-
I need my hackbook in the next few days to process the pressing items on my to-do list. Once that's done I can tackle the update.
-
Works? If yes, enjoy it
-
Gotcha @Max.1974 ?
-
Hi @BuXb With VoodooHDA, there¡¯s no need to remove it ¡ª just reinstall the patch if it¡¯s not recognized, but it usually doesn¡¯t lose functionality. If necessary, simply run the installation script again. You can use this commands from Terminal after upgrade: sudo chmod -Rf 755 /L*/E* sudo chown -Rf 0:0 /L*/E* sudo touch -f /L*/E* sudo chmod -Rf 755 /S*/L*/E* sudo chown -Rf 0:0 /S*/L*/E* sudo touch -f /S*/L*/E* sudo kextcache -Boot -U / sudo kextutil -v /Library/Extensions/VoodooHDA.kext sudo kextload /Library/Extensions/VoodooHDA.kext After reboot you can test: log show --last boot | grep -i voodoo One by One
-
Anybody here already updated to 26.0.1? If so, did you have to remove VoodooHDA from /L/E/ for the update to run through, or could it remain?
-
@Austere.J and/or anyone else that tested the kext in Tahoe: will the kext work in Tahoe with VT-D enabled in BIOS but patching the DMAR table to remove reserved regions and dropped the original DMAR table as explained in Dortania. Right now, that's the only way my i-225V ethernet card works in Tahoe. AppleIGC kext does not work in Tahoe with VT-D enabled in BIOS. -
For me works disable this two toggles :
- 30,479 replies
-
- 1
-
-
- bootloader
- efi
- (and 2 more)
-
Everything came together perfectly but buildme was never fixed and I remain on my semi-synchronized branch. Thanks everyone.
- 30,479 replies
-
- 1
-
-
- bootloader
- efi
- (and 2 more)
-
Thanks my good freind ? Really appreciate that you taking time You can use any script you want thats not a probleme, I just clarified simply how to for the newbie.
- 30,479 replies
-
- 2
-
-
-
- bootloader
- efi
- (and 2 more)
-
Thank you very much. I'm already downloading it, but how can I prevent it from updating? So far I can say that it builds with Python 3.13.7 + Xcode_26.0.1 and Python 3.9 + Xcode_15.3 ?
- 30,479 replies
-
- 1
-
-
- bootloader
- efi
- (and 2 more)
-
I think we are not ready for this yet... in the meantime I disabled the card from the bios ? and restored the config.
- 98 replies
-
- 1
-
-
- broadcom wifi
- macos sonoma
- (and 4 more)
-
5MB EMAIL changed their profile photo -
The one thing I am apprehensive about is the possibility of AirDrop not working as reported hence the reason I was holding off. Having Wi-Fi working on the others in the system and not Tahoe, twisted my arm to go this route.- 98 replies
-
- 1
-
-
- broadcom wifi
- macos sonoma
- (and 4 more)
-
I'm sure it works for you. We tried it with a user on macOS86 with BCM943602CS ( mine is BCM4350 0x14E4, 0x43A3 ? ) and it worked... we need to solve the LAN problem.
- 98 replies
-
- 1
-
-
- broadcom wifi
- macos sonoma
- (and 4 more)
-
If you trust me, this file is the zip downloaded directly from Apple¡¯s developer website. If you can¡¯t access it: https://www.mediafire.com/file/it564ypd8q5wava/Xcode_16.4-melhor.xip/file
- 30,479 replies
-
- 1
-
-
- bootloader
- efi
- (and 2 more)
-
maybe you'll have to walk the debug way? DW1820A should be supported... I also used a DW1820A in the past, and I remember that my card was so problematic: sometimes it was somehow "blocked" and only worked again after I completely turned off the power to my laptop (with also disconnecting the battery) - doesn't mean that this could be the case for you- 98 replies
-
- 1
-
-
- broadcom wifi
- macos sonoma
- (and 4 more)
-
I am in the process of trying this to get WIFI on Tahoe. I have ordered a supposedly compatible BCM943602CS Card and PCIe adapter. I am hoping after putting it all together, it will be just a matter of plug and play like the Fenvi. I made a promise I wouldn't spend any unnecessary money on the Hack being as this is the last macOS for us but here we are.
- 98 replies
-
- 2
-
-
- broadcom wifi
- macos sonoma
- (and 4 more)
-
I checked everything four times and found no errors or warnings. I was unable to obtain Xcode 16 legally. Thank you and good luck! Official instructions: Build Clover on macOS Tahoe 26 from scratch. ? Install Xcode 26 or Xcode 16, Make sure you open Xcode then Install additional required components. ? Install Python 3.11.5 or Python 3.13.7 [?] ?? Clone and Build Clover rm -rf ~/src mkdir -p ~/src cd ~/src git clone https://github.com/CloverHackyColor/CloverBootloader.git cd ~/src/CloverBootloader && ./buildme buildme Option:?? 1 build Clover (Default Toolchain) 2 make pkg No other methods are discussed or supported by the authors and no claims will be accepted.
-
Setting DisableIoMapper to true disables AppleVTD. (But AppleVTD is required for the Intel i225-V ethernet DriverKit, although there¡¯s a workaround for this - using the old AppleIntelI210Ethernet.kext from Monterey.) So can you confirm if you have AppleVTD enabled (you can check in the IORegistryExplorer) and working Wi-Fi in Sequoia at the same time? Is this issue only affecting Tahoe?
